[Feb-2022] Feel Network Appliance NS0-194 Dumps PDF Will likely be The best Option
NS0-194 exam torrent Network Appliance study guide
NetApp NS0-194 Exam Topics:
| Section | Objectives |
|---|---|
| Data Protection | -Identify data protection concepts -Demonstrate knowledge of data protection operations |
| Troubleshooting NetApp Hardware and Software | -Demonstrate knowledge of how to collect and analyze information -Demonstrate knowledge of how to troubleshoot data access problems -Demonstrate knowledge of how to analyze performance |
| NetApp Cloud Data Services | -Identify the components of cloud data services -Identify the components of a hybrid cloud solution |
NEW QUESTION 39
Your storage system has experienced a double-disk failure. When is this scenario considered to be in double-degraded mode?
- A. when two disks failed on a single aggregate
- B. when two disks failed on a single disk shelf
- C. when two disks failed in a single RAID group
- D. when two disks failed on a node
Answer: C
NEW QUESTION 40
Referring to the exhibit.
Your customer's MetroCluster controllers have generated AutoSupport notifications with a "DISK REDUNDANCY FAILED" message.
Referring to the exhibit, which component is causing the problem?
- A. the ATTO bridges on site3
- B. the SAN switch sitel_2
- C. the SAN switch site3_3
- D. the inter-switch link (ISL) between site1 and site3
Answer: D
NEW QUESTION 41
You want to map an iSCSI LUN from a NetApp controller.
Which two components are required to accomplish this task? (Choose two.)
- A. igroup
- B. initiator WWPN
- C. iSCSI initiator
- D. FCP zoning
Answer: B,D
NEW QUESTION 42
Referring to the exhibit.
Which two actions would you perform to address the system alternate-control-path (ACP) connectivity issue shown in the exhibit? (Choose two.)
- A. Turn options acp.enable off and then on.
- B. Reseat the shelf modules.
- C. Reseat the ACP cable.
- D. Perform a takeover and giveback.
Answer: A,D
NEW QUESTION 43 
In the AFF A200 shown in the exhibit, which port is a CNA port?
- A. 0a
- B. e0a
- C. e0c/0c
- D. |0|0|
Answer: C
Explanation:
Explanation/Reference: https://docs.netapp.com/platstor/topic/com.netapp.doc.hw-2700-install-setup/GUID-FE4BD3C8-
3DB4-438A-A5CE-FEEF74AE8BAF.html
NEW QUESTION 44
Which two OnCommand products would you use to manage your clustered Data ONTAP systems? (Choose two.)
- A. OnCommand Host Package
- B. OnCommand System Manager
- C. OnCommand Unified Manager
- D. OnCommand Shift
Answer: A,D
NEW QUESTION 45
A customer is trying to enable NVMe and wants to use the FC adapters in the controllers but cannot enable the protocol.
Referring to the exhibit, what is causing the problem?
- A. There are no FC adapters installed with a max-speed of 32Gbps.
- B. There are no FC adapters installed with the speed set to 32Gbps.
- C. There are no FC adapters installed with a media type of NVMe.
- D. There are no FC adapters installed with a physical protocol set to NVMe.
Answer: D
NEW QUESTION 46
Which NetApp HCI component communicates with activeiq.solidfire.com and the Cloud Data Services portal?
- A. the NetApp Element software Management Interface
- B. the NetApp Trident software
- C. the NetApp Element software vSphere plug-in
- D. the management node (mNode)
Answer: D
Explanation:
Explanation/Reference: http://docs.netapp.com/hci/index.jsp?topic=%2Fcom.netapp.doc.hci-ude-170%2FGUID-
87FD2BD4-1C4C-4491-9A66-D2C5EA8C1B88.html
NEW QUESTION 47
A customer wants to upgrade a cluster to a new version of ONTAP. In this scenario, what are two ways to ensure a successful upgrade? (Choose two.)
- A. Use Config Advisor.
- B. Use the Upgrade Advisor report.
- C. Use OnCommand System Manager.
- D. Use OnCommand Unified Manager.
Answer: B,C
NEW QUESTION 48
A customer mentions that after replacing a failed power supply, their FAS2220 system is now unavailable.
Which statement is correct In this scenario?
- A. The FAS2220 system requires that the power supply is replaced within two minutes after removal.
- B. The FAS2220 system shut down after 15 minutes due to having only one power supply installed.
- C. The FAS2220 system requires both power supplies properly functioning to serve data.
- D. The power supply is not hot-swappable on a FAS2220.
Answer: C
NEW QUESTION 49
How many drive bays does a DS4246 shelf have?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 50
You want to update your storage system and are concerned about the compatibility of the SAN components and the host environment.
In this scenario, which two actions should you take to verify compatibility? (Choose two.)
- A. Use Active IQ Interop Advisor.
- B. Use the Interoperability Matrix Tool.
- C. Use the Active IQ Config Advisor.
- D. Upload AutoSupports to Active IQ.
Answer: B,C
NEW QUESTION 51
A manager wants a volume to have a guaranteed 300 MB/s of read performance. You explain that you cannot do this on FAS storage running ONTAP 9.3 backed by 10,000 RPM disks.
What is the reason for this response?
- A. Throughput floors can only guarantee up to 125 MB/s.
- B. Throughput floor apply to only ISCSI access.
- C. Throughput floors required a license
- D. Throughput floors required AFF.
Answer: D
NEW QUESTION 52
An administrator notices that the clustered Data ONTAP 8.2.3 controllers are less responsive than normal. You use On Command Performance Manager but do not see obvious problems, yet, this particular issue is constant. Users are starting to complain.
Which tool would you use to collect data to help diagnose this issue?
- A. Auto Support
- B. Perfmon
- C. Perfstat
- D. Performance Archive
Answer: B
NEW QUESTION 53
A customer has one storage virtual machine (SVM) that is using Fibre Channel as a protocol (FCP). Some clients are successfully accessing LUNs on this SVM.
The zoning is done by using worldwide port names (WWPNs). The customer creates a second SVM for Fibre Channel and wants to access new LUNs in this SVM from the same clients.
Which three statements are true in this scenario? (Choose three.)
- A. The initiator groups (igroups) from the first SVM are also working for the second SVM.
- B. Fibre Channel zoning must be reconfigured for the new SVM.
- C. You must map the new LUNs in the second SVM to the correct initiator group (igroup).
- D. FCP must be enabled on the second SVM.
- E. Fibre Channel zoning does not need to be changed if the second SVM uses the same ports as the first SVM.
Answer: A,D,E
NEW QUESTION 54
Which NetApp Web-based tool would be used to analyze Perfstat output?
- A. Field Portal
- B. SmartSolve
- C. LatX
- D. My AutoSupport
Answer: A
NEW QUESTION 55
......
NetApp NS0-194 Exam Certification Details:
| Exam Code | NS0-194 NCSE |
| Number of Questions | 60 |
| Exam Price | $150 USD |
| Exam Registration | PEARSON VUE |
Use Valid New NS0-194 Test Notes & NS0-194 Valid Exam Guide: https://freedumps.torrentvalid.com/NS0-194-valid-braindumps-torrent.html