Use Real NSE6_FAZ-7.2 Dumps - Fortinet Correct Answers updated on 2024
NSE 6 Network Security Specialist NSE6_FAZ-7.2 Exam Practice Dumps
Fortinet NSE6_FAZ-7.2 certification is a valuable credential for professionals who want to gain expertise in FortiAnalyzer administration. Fortinet NSE 6 - FortiAnalyzer 7.2 Administrator certification demonstrates the candidate's ability to manage and monitor a FortiAnalyzer system effectively. It also opens up new career opportunities for individuals who want to work with Fortinet products and services.
Fortinet NSE6_FAZ-7.2 exam consists of 35 multiple-choice questions that you need to complete within 60 minutes. NSE6_FAZ-7.2 exam is available in English and Japanese and can be taken at any Pearson VUE test center. NSE6_FAZ-7.2 exam covers various topics, such as FortiAnalyzer deployment, configuration, and management; log collection and analysis; report generation; and troubleshooting.
NEW QUESTION # 15
Refer to the exhibit.
Which image corresponds to the packet capture shown in the exhibit?
- A.
- B.
- C.
Answer: A
Explanation:
The exhibit shows a packet capture with a syslog message containing a log event from a FortiGate device. This log event includes several details such as the date, time, and event message. The corresponding image that matches this packet capture would be the one which shows that the FortiGate device has logs being received in real-time, as indicated by the highlighted section in the packet capture where it mentions "real-time".
Therefore, Option A is the correct answer because it shows logs with "Real Time" status for the FortiGate-VM64 device, indicating that this FortiAnalyzer is currently receiving real-time logs from the device, matching the activity in the packet capture.References:Based on the provided exhibits and the real-time logging information, correlated with the knowledge from the FortiAnalyzer 7.2 Administrator documentation regarding log reception and device management.
NEW QUESTION # 16
Which two statements are true regarding the log synchronization states for HA on FortiAnalyzer? (Choose two.)
- A. By default. Log Data Sync is disabled on all backup devices.
- B. With Initial Logs Sync, when you add a unit to an HA cluster, the primary device synchronizes its logs with the backup device.
- C. When Log Data Sync is turned on, the backup device reboots and then rebuilds the log database with the synchronized logs.
- D. Log Data Sync provides real-time log synchronization to all backup devices.
Answer: B,D
Explanation:
For HA on FortiAnalyzer, Log Data Sync ensures real-time log synchronization among all cluster members, including backup devices. This feature is enabled by default. The Initial Logs Sync state is triggered when a new unit is added to an HA cluster, where the primary unit synchronizes its logs with the newly added unit.
After the initial synchronization, the secondary unit reboots and rebuilds its log database with the synchronized logs.References:FortiAnalyzer 7.2 Administrator Guide, "Log synchronization" section.
NEW QUESTION # 17
What is the best approach to handle a hard disk failure on a FortiAnalyzer that supports hardware RAID?
- A. Shul down FortiAnalyzer and replace the disk.
- B. Run execute format disk to format and restart the FortiAnalyzer device.
- C. Perform a hot swap of the disk.
- D. There is no need to do anything because the disk will self-recover.
Answer: C
Explanation:
In systems that support hardware RAID, hot swapping allows for the replacement of a failed disk without shutting down the system. This capability is crucial for maintaining uptime and ensuring data redundancy and availability, especially in critical environments. The RAID controller rebuilds the data on the new disk using redundancy data from the other disks in the array, ensuring no data loss and minimal impact on system performance.
In the context of a FortiAnalyzer unit equipped with hardware RAID support, the optimal approach to addressing a hard disk failure is to perform a hot swap of the disk. Hardware RAID configurations are designed to provide redundancy and fault tolerance, allowing for the replacement of a failed disk without the need to shut down the system. Hot swapping enables the administrator to replace the faulty disk with a new one while the system is still running, and the RAID controller will rebuild the data on the new disk, restoring the RAID array to its fully operational state.References:FortiAnalyzer 7.2 Administrator Guide - "Hardware Maintenance" and "RAID Management" sections.
NEW QUESTION # 18
Which two statements about FortiAnalyzer operating modes are true? (Choose two.)
- A. Analyzer mode is the default operating mode.
- B. When in analyzer mode. FortiAnalyzer supports event management and reporting features.
- C. When in collector mode. FortiAnalyzer offloads the log receiving task to the analyzer.
- D. For the collector, you should allocate most of the disk space to analytics logs.
Answer: A,B
Explanation:
The default operating mode for FortiAnalyzer is analyzer mode. In this mode, FortiAnalyzer provides full functionality for event management and reporting features. This mode is intended for environments where comprehensive analysis and reporting are required. It allows FortiAnalyzer to collect, analyze, and store logs, as well as generate reports and manage events.References:FortiAnalyzer 7.4.1 Administration Guide,
"Operating modes" section.
NEW QUESTION # 19
Which two statements are true regarding FortiAnalyzer system backups? (Choose two.)
- A. Backup files can be uploaded to SCP and SFTP servers.
- B. Existing reports can be included in the backup files.
- C. Scheduled system backups can be configured only from the CLI.
- D. The system reserves at least 5% to 20% disk space for backup files.
Answer: A,B
Explanation:
FortiAnalyzer allows for the inclusion of existing reports in the backup files, providing a comprehensive backup of configurations and data. Additionally, the backup files can be configured to be uploaded to SCP and SFTP servers, ensuring secure transfer and offsite storage of backup data. This can be configured both in the GUI and the CLI, providing flexibility in how backups are scheduled and managed.References:FortiAnalyzer
7.4.1 Administration Guide, "Scheduling automatic backups" section.
NEW QUESTION # 20
After you have moved a registered logging device out of one ADOM and into a new ADOM, you run the following command: execute sql-local rebuild-adom <new-ADOM-name> What is the purpose of running this CLI command?
- A. To migrate the archive logs to the new ADOM
- B. To remove the analytics logs of the device from the old database
- C. To populate the new ADOM with analytical logs for the moved device, so you can run reports
- D. To reset the ADOM disk quota enforcement to its default value
Answer: C
Explanation:
When you move a registered logging device from one ADOM (Administrative Domain) to another in FortiAnalyzer, it's essential to ensure that the analytical logs for the moved device are available in the new ADOM to maintain continuity in reporting and log analysis. The commandexecute sql-local rebuild-adom < new-ADOM-name>is used specifically for this purpose. Running this command populates the new ADOM with the analytical logs of the moved device, enabling you to generate accurate and comprehensive reports based on the historical data of the device in its new ADOM context. This process ensures that the transition of devices between ADOMs does not lead to a loss of analytical insight or reporting capabilities for the device's traffic and events.
NEW QUESTION # 21
In a Fortinet Security Fabric, what can make an upstream FortiGate create traffic logs associated with sessions initiated on downstream FortiGate devices?
- A. The upstream FortiGate is configured to do NAT.
- B. The downstream device cannot connect to FortiAnalyzer.
- C. Log redundancy is configured in the fabric.
- D. The traffic destination is another FoitiGate in the fabric.
Answer: B
Explanation:
In a Fortinet Security Fabric, an upstream FortiGate may create traffic logs for sessions initiated on downstream FortiGate devices if the downstream device is unable to connect to FortiAnalyzer. This allows for continuity of logging and ensures that session logs are captured and stored even if the downstream device loses its connection to the log management system.References:FortiAnalyzer 7.4.1 Administration Guide, "Fortinet Security Fabric" section.
NEW QUESTION # 22
Which process caches logs on FortiGate when FortiAnalyzer is not readable?
- A. sqlplugind
- B. miglogd
- C. logfiled
- D. oftpd
Answer: C
Explanation:
The processlogfiledin FortiGate units with an SSD disk is responsible for buffering logs when FortiAnalyzer is unreachable. If the connection to FortiAnalyzer is lost and the memory log buffer is full,logfiledallows logs to be buffered on disk. These logs are then sent to FortiAnalyzer once the connection is restored. This reliable logging mechanism ensures that logs are not lost during periods when FortiAnalyzer is not reachable, thereby maintaining log integrity and continuity.References:FortiOS 7.4.1 Administration Guide, "Log Buffering" and
"Reliable Logging" sections.
NEW QUESTION # 23
Which two statements are true regarding fabric connectors? (Choose two.)
- A. The storage connector service does not require a separate license to send logs to the cloud platform.
- B. Fabric connectors allow you to save storage costs and improve redundancy.
- C. Cloud-out connectors allow you to send real-time logs to public cloud accounts like Amazon S3.
- D. Using fabric connectors is more efficient than third-party polling information from the FortiAnalyzer API
Answer: A,D
Explanation:
Fabric connectors in FortiAnalyzer, such as security fabric connectors (e.g., FortiClient EMS, FortiMail, FortiCASB) and storage connectors (e.g., Amazon S3, Azure Blob Container, Google Cloud Storage), provide efficient integration and data sharing capabilities. Using fabricconnectors for direct integration with FortiAnalyzer is more efficient and reliable than relying on third-party applications to poll information through the FortiAnalyzer API. Additionally, the ability to send logs to cloud storage platforms like Amazon S3, Azure Blob, and Google Cloud directly through storage connectors is a built-in feature that does not require an additional license, thus saving on storage costs and improving redundancy without incurring extra licensing fees.References:FortiAnalyzer 7.4.1 Administration Guide, "Fabric Connectors" and "Storage connectors" sections.
NEW QUESTION # 24
Refer to the exhibit.
The image displays "he configuration of a FortiAnalyzer the administrator wants to join to an existing HA cluster.
What can you conclude from the configuration displayed?
- A. After joining to the cluster, this FortiAnalyzer will keep an updated log database.
- B. This FortiAnalyzer will join to the existing HA cluster as the primary.
- C. This FortiAnalyzer is configured to receive logs in its port1.
- D. This FortiAnalyzer will trigger a failover after losing communication with its peers for 10 seconds.
Answer: C
Explanation:
The configuration displayed in the exhibit indicates that the FortiAnalyzer is set up with a cluster virtual IP address of 192.168.101.222 assigned to interface port1. This setup is typically used for the FortiAnalyzer to receive logs on that interface when operating in a High Availability (HA) configuration. The exhibit does not provide enough information to conclude whether this FortiAnalyzer will be the primary unit in the HA cluster or the duration for the failover trigger; it only confirms the interface configuration for log reception.References:Based on the FortiAnalyzer 7.4.1 Administration Guide, the similar configurations for HA and log reception are discussed, which would be relevant for understanding the settings in FortiAnalyzer
7.2.
NEW QUESTION # 25
An administrator has configured the following settings:
What is the purpose of executing these commands?
- A. To encrypt log transfer between FortiAnalyzer and other devices.
- B. To create the secure channel used by the OFTP process.
- C. To record the hash value and authentication code of log files.
- D. To verify the integrity of the log files received.
Answer: D
Explanation:
The purpose of executing the provided CLI commands, which include setting thelog-checksumtomd5-auth, is to ensure the integrity of the log files. This setting is used to record the MD5 hash value of log files, which is a widely used cryptographic hash function that produces a 128-bit (16-byte) hash value. By using MD5 authentication, FortiAnalyzer ensures that the log files have not been altered or tampered with during transit, thereby verifying their integrity upon receipt.This is not related to encrypting log transfers, scheduling reports, or creating secure channels for OFTP (Over-the-FortiGate Protocol) processes.
NEW QUESTION # 26
Which statement is true about ADOMs?
- A. In normal mode, you cannot change the disk quota of the ADOM after its creation.
- B. A fabric ADOM can include all the device types supported by FortiAnalyzer.
- C. When a FortiAnalyzer Fabric is implemented, the default ADOM mode is set to advanced.
- D. You can change the ADOM mode only through the GUI.
Answer: B
Explanation:
Regarding ADOMs (Administrative Domains) in FortiAnalyzer, a fabric ADOM is capable of including all device types that FortiAnalyzer supports. This is part of the flexibility offered by ADOMs to manage and report on logs from various devices within a Fortinet security fabric. ADOMs can be enabled to support non-FortiGate devices as well, and the root ADOM in Fabric ADOMs provides visibility into all Security Fabric devices. Additionally, it should be noted that in normal mode, you cannot assign different FortiGate VDOMs to different ADOMs, while in advanced mode, you can, which provides a more granular control over the log data from individual VDOMs.References:FortiAnalyzer 7.4.1 Administration Guide, "ADOMs" and
"ADOM device modes" sections.
NEW QUESTION # 27
What is true about FortiAnalyzer reports?
- A. When you enable auto-cache, reports are scheduled by default.
- B. Reports can be saved in a CSV format.
- C. The reports from one ADOM are available for all ADOMs.
- D. You require an output profile before reports are generated.
Answer: D
Explanation:
For FortiAnalyzer reports, an output profile must be configured before reports can be generated and sent to an external server or system. This output profile determines how the reports are distributed, whether by email, uploaded to a server, or any other supported method. The options such as auto-cache, saving reports in CSV format, or reports availability across different ADOMs are separate features/settings and not directly related to the requirement of having an output profile for report generation.
NEW QUESTION # 28
......
Get ready to pass the NSE6_FAZ-7.2 Exam right now using our NSE 6 Network Security Specialist Exam Package: https://freedumps.torrentvalid.com/NSE6_FAZ-7.2-valid-braindumps-torrent.html